Contact Us
NingBo Dacheng Machinery & Electrical Co.,Ltd
Add: No.157 Shangyang Road, Yinzhou Area, Ningbo, Zhejiang
Contact Person: Mr Chen
Tel: +86-574-88232682
Tel: +86-574-88232883
Tel: +86-574-88232799
Mobile: +8613605884383
Fax: +86-574-88233109
Home > Knowledge > Content
Grinding machine use precautions
Feb 12, 2019

The use of the grinding wheel is dangerous. For your safety, the following precautions are listed below:

The grinder is one of the most commonly used machines in a mechanical factory. It is installed properly and meets safety requirements. It is used correctly and in compliance with safe operating procedures. These problems are directly related to the personal safety of each employee, so we must pay enough attention to us in actual use.

Installation process

When installing, firstly, the safety quality of the grinding wheel should be tested. The method is to tap the side of the grinding wheel with a nylon hammer (also with a pen), and the sound is crisp and there is no problem. Positioning Problem Where the grinder is installed is the first issue to be considered during our installation. Only when a reasonable and appropriate position is selected can we perform other work. Grinding machines are forbidden to be installed in the vicinity of the equipment and operators or in the places where people often pass. Generally, the larger workshops should be equipped with special grinder rooms. If it is not possible to set up a special grinder house due to the limitation of the terrain of the plant, a protective baffle of not less than 1.8 m height should be installed on the front side of the grinder, and the baffle plate is required to be firm and effective.

Previous: The difference between grinding wheel and abrasive belt

Next: Polishing machine principle and use